The IQTEK-Mini are a range of multi-purpose platforms for digital signal processing applications.
SIMPLEX-TX
The IQTEK-Mini-TX is a multi-purpose FPGA platform designed specifically for DSP applications. The board has the following specifications:
| Parameter | Specification |
|---|---|
| FGPA device | Altera Cyclone III EP3C40Q240C8N |
| External interfaces inter | Two RS232 sockets, Clock Input, Clock Output, JTAG Programming Socket, ASDO Programming Socket (with 8MB Boot PROM), Ethernet Socket and PHY, General Purpose LEDs (x4), General Purpose switch (x1), 7 pin general purpose input–output (GPIO), 14-bit DAC 125MSa/s (x2) |
| Power requirements | 12V, 242mA nominal |
| Load device | 256kB E²PROM |
| Other | 32k x 9 bit hardware FIFO |
| On-board crystal | On-board 50MHz crystal |
SIMPLEX RX
The IQTEK-Mini-RX is a multi-purpose FPGA platform designed specifically for DSP applications. The board has the following specifications:
| Parameter | Specification |
|---|---|
| FPGA device | Altera Cyclone III EP3C40Q240C8N |
| External Interfaces Inter | Two RS232 sockets, Clock Input, Clock Output, JTAG Programming Socket, ASDO Programming Socket (with 8MB Boot PROM), Ethernet Socket and PHY, General Purpose LEDs (x4), General Purpose switch (x2), three 7-pin general purpose input–output (GPIO) connectors, 14-bit ADC 65MSa/s (x2) |
| Power requirements | 12V, 236mA nominal |
| Load device | 256kB E²PROM |
| Other | 32k x 9 bit hardware FIFO |
| On-board crystal | On-board 50MHz crystal |